How to clean and stain your deck
Wood decks take a beating。 They are constantly exposed to the damaging effects of the sun, standing water, snow, pets and foot traffic。 Without preventive maintenance, your wood deck will begin to turn gray and age, and if ignored for too long the deck may begin to deteriorate which can lead to costly repairs。 Follow these steps to protect your deck against an early demise。
Deck cleaning and prep
As with all coating projects, preparing the surface is the key to a long-lasting finish. First, you must remove the dirt, dust, mildew, and previous coatings. Most people choose power washing to clean their deck. Deck cleaning products can also make the job easier. Ask your Diamond Vogel store for more information on deck cleaning products. Before you stain, the deck must be dry. The deck should dry for two to three days before moving on.
(We have a full line of deck cleaners, strippers, and brighteners specifically for wood decks。 Your local Diamond Vogel Paint Store can assist you with power washing tips, selection of cleaning products, and mildew removal techniques if needed。)
Selecting the best deck stain
Applying stain to your deck is one of the easiest ways to protect your investment.Stains that penetrate are preferred since failure doesn’t typically result in peeling. For the ultimate protection look for a penetrating stain that takes advantage of trans-oxide pigments. Trans-oxide pigments deliver a beautiful, rich, clear color that really highlight the natural beauty of the wood. Diamond Vogel’s Grain Stain Semi-Transparent Deck Stain uses trans-oxide pigments and provides long term protection and beauty for your deck.
为你的木板上色是保护你的木板最简单的方法之一。首选渗透性强的油漆，因为就算出现变故也不会导致油漆剥落。要达到最好的保护效果就要寻找一种抗氧化的渗透力强的颜料。抗氧化颜料具有美丽，丰富，清晰的颜色，真正突出了木材的自然美。 Diamond Vogel’s Grain Stain Semi-Transparent Deck Stain采用抗氧化颜料，为你的木板提供长期保护让其长期保持美感。
You can apply the stain by brush, roller, or spray, but for best results brush the stain into the decking. Protect all areas not receiving stain with tape and plastic. Two coats of stain are recommended for maximum durability. Many stains require an application technique called “wet-on-wet.” This is when the second coat of stain is applied before the first coat is thoroughly dried. Apply stain to the full length of a plank to avoid lap marks and generally you can work on three planks at a time. Once a section of planks is stained, recoat with the second coat and move to the next section of planks.
Maintaining your deck
Reapply a new coat of stain every two to three years. If the deck does not show signs of graying, a quick cleaning is all that is normally required before applying another coat of defense.